This article will cover:
- How to configure trip stages
- How to configure leg statuses
SET-UP TRIP STAGES
Go to Operations > Settings > Stages /Leg Status
- Click "Create New"
- Enter the applicable data and click "Create"
The Advanced Dispatching Engine provides various settings within the stages portion of the application. Here is a high-level explanation of each field to better assist in creating a stage, associating a leg status, defining permissions and managing the control items/time tolerances with regards to the stage / leg status associations.
Name - Name of stage
Active - Check the box to designate the stage as active
Enable Log - Designate per stage whether users are able to make changes and save the flight log at that stage. If enable log is not checked, the appropriate individuals will be able to access and view the log but it will be in read-only mode.
Calendar Style - The color reflected on the grease board when a trip is in this stage
Auto-set Leg Status (Advanced Dispatching Engine only) - Active, in review, cleared, ready for release, released, en-route, arrived and verified are the various leg status options a user may associate to a specific stage. For example, if you designate the leg status as "released" to the "dispatched" stage, when the trip stage is set to "dispatched," all legs will show "released" automatically.
Sort Order - The order sequence this stage needs to take place in relationship to the other stages
Crew Briefing - Set if the stage should include the crew briefing flags in the Trip Snapshot
Crew Briefing Severity - Set the crew briefing severity for the results in the Trip Snapshot
- General Roles - Select who in the organization is able to change trips to this stage. If no roles are selected for this, all users with access to the trip will be able to progress the trip to this stage.
- Warning/Critical Hard Stops - Select whether warning and/or critical hard stops are active on the stage and select who in the organization is able to override those hard stops.
Change Control Options (Advanced Dispatching Engine only) - When a trip is in this stage, if any changes occur to areas that are checked (aircraft, passenger manifest, etc.), it will automatically change the applicable legs back to In Review. Additionally, if the crew brief setting is set to yes on the account level (Global Setting > Trips > Settings), if a crew member has already acknowledged briefed, when designated change controls items change, the crew brief reverts back to no on the pilot side and in the trip snapshot informs ops the crew needs to be briefed again.
The change control options also relate to APIS status if selected. The system will look at the change control options that are selected for the trip stage and will update the status of the eAPIS transmission to critical in the snapshot if any of the selected change controls occur after the eAPIS has been submitted. Change Control Items: Aircraft, Manifest, Crew Assignment, Airports, Reg Type, FBO Assignment, Scheduled time change, Pax/Crew Info
Passenger/Crew Information Update - Set change controls for the leg status and international leg status based on aircraft adjustments. Controls can be setup for passenger/crew information changes including Name, DOB and any changes made to the Travel Document set for the Passenger or Crew. This can be specified to only affect the international leg status, the normal leg status or both. Finally, when a trip is cancelled (marked as Inactive), all International Leg status' will automatically change to cancelled as well.
Exclude Aircraft Designated As - When change control options are selected on a stage to auto set a leg status, if a regulatory type is selected that type will be excluded from the change control settings. The regulatory type on the aircraft profile must be selected.
Here is an example of the settings for the "Dispatched" stage:
SET-UP LEG STATUSES
The settings for leg statuses can be found within Operations > Settings > Stages/Leg Status > Flight Leg Status.
Leg Status names cannot be modified nor can they be made inactive within the application.
Within each leg status Admin's will have the ability to set the following user permissions:
- General Roles - This will designate users who are able to change a leg to the status being edited. If this field is left blank any user role can change a leg to this status.
USE WITHIN A TRIP
Once in a trip if a user does not have the appropriate permissions to change the leg status per the General Roles settings mentioned above, they will not be able to change the status and will instead be met with a yellow warning message.